Electric pavement sweeper
Balanced and ergonomic, it is the perfect solution for sweeping pavements, pedestrianised areas, car parks and any small or medium-sized areas, both indoors and outdoors. Safe, easy to handle and efficient, MaxWind offers runtime of up to ten hours and improves the lives of both operatives and residents.
Permitted capacity: 110 – 130 kg (242.51 – 286.60 lb)
Sweeping width: 1,250 – 1,320 mm (49.21 – 51.97 in)
LiFePO4, AGM or lead-acid 24 Volt batteries
Maximum speed: 8 km/h (5 mi/h)
Waste hopper: 110 – 130 l (29.06 – 34.34 gal)
Water tank: 22 l – 37 l (5.81 – 9.77 gal)
Runtime: 8 – 10 hours
Maximum gradient: 20%
Tenax MaxWind has two fixed front wheels which provide excellent directional stability and peerless weight distribution, allowing the sweeper to work on any floor type. At the same time, the large, swivelling and damped rear wheels make the steering light and agile, ensuring greater safety.
MaxWind can be equipped with different types of 24 Volt low-voltage battery packs designed specifically for the device. The possibility to use different types of batteries (AGM and lead acid) allows the machine to be adapted to the specific working requirements and budget of each customer. Depending on the battery type chosen, runtime ranges from eight to ten hours, and is therefore able to cover an entire work shift. The tried and tested technology used minimises the environmental footprint and offers high levels of recyclability, as well as high levels of safety thanks to the low voltage.
MaxWind can be equipped with on-board or external 220 Volt single-phase battery chargers with different voltages, power ratings and charging times to fully meet customer requirements.
The MaxWind electric ride on sweeper is equipped with a mechanical suction waste collection system. A mobile, self-regulating cylindrical central brush directs the waste collected by the counter-rotating brushes, located in front of the front axle, directly into the waste hopper. Thanks to the panel filter available in different versions, including polyester and HEPA, a filtration level of 99% is guaranteed, with all fine dust up to PM 2.5 retained. It is also equipped with a 120 mm (4.72 in) diameter 3 m (9.84 ft) long leaf suction hose to reach the most difficult locations. During the work phase, the self-balancing nature of each component adapts to any surface to ensure perfect operation at all times.
The watertight rear waste hopper of 110 – 130 l (29.06 – 34.34 gal) capacity is made of Fe360 steel and equipped with ergonomic side handles and wheels for easy removal. It can be used with or without standard disposable plastic refuse sacks. Removal for emptying is fast and simple, requiring no physical exertion by the operator. The 22 or 37 l (5.81 or 9.77 gal) clean water tank guarantees maximum runtime and use of the dust abatement system.
The MaxWind sweeper is equipped with an ergonomic and intuitive control panel which provides a high level of comfort and a unique driving experience to the operator through its adjustable speed control as well as the independent rear suspension. It can be used in ride-on or walk-behind mode, as required. The single-wheel saddle and deluxe seat are both extremely ergonomic, allowing the operator to use the device while seated, providing complete comfort and safety both during the working phase and during transfers. The machine offers perfect visibility of both the working area and surroundings. Moreover, the enhanced lighting of the sweeping area provides maximum visibility during night-time operation or in poor visibility in order to protect the operator.
Fleet monitoring and digitisation can facilitate the work of both owners and operators. Tenax offers targeted services and support, with constant monitoring to minimise downtime and operating costs. The goal is to guarantee use of the sweepers at an optimum level by eliminating all operating inefficiencies.
MaxWind’s extremely compact external dimensions allow it to be used on any indoor or outdoor surface, and make it extremely convenient and agile in urban and pedestrianised locations.
The filtration system, which offers a guaranteed 99% filtration level with retention of dust down to PM 2.5, can be equipped with different optional filter types as required, including polyester and HEPA filters.
MaxWind can also be equipped with a single-wheeled operator chariot for even greater driver comfort, which can be used in the sitting or standing position, or else a two-wheeled chariot with deluxe seat for even greater comfort.
MaxWind can be equipped with an enhanced suction kit to increase the sweeper’s already impressive suction performance and achieve an even higher working capacity.
MaxWind can be equipped with a blower system which allows the suction system to be converted to a blower with hose. Ideal for use with leaves.
MaxWind can be equipped with a scraper system composed of a steel brush, ideal for simple, fast and precise weed removal.
MaxWind can be equipped with an ergonomic low-pressure washing lance for thorough cleaning and sanitisation of street furniture.
For greater operator convenience, MaxWind can be equipped where required with an ergonomic side grabber and broom kit fixed to the side of the machine, for convenient collection of refuse from the ground.
Using MaxWind in pedestrianised areas and on pavements may require the installation of ramps on the side of the device to allow the operator to handle any level changes with ease.
For greater visibility of the work area, MaxWind can be equipped with supplementary LED lights on the inlet and brushes to allow use even in limited visibility.
